Signal PROFILER E7042B دستگاه اسپكتروم آناليزر

Combo Analyzer-E7042B/E7062B SignalPROFILER

دسترسی: در انبار

Key Benefits
• RF, fiber and wireless signal quality testing – in a
single instrument
• Perform traditional RF feedline tests, inspect fiber
connectors with auto pass/fall results and measure
RF/Optical power
• Perform comprehensive spectrum and signal analysis
for complete site profile and monitoring of signal
environment
• Test MIMO 4×4 antenna performance
• Detect signal degradation and system performance
over time with trace overlay
• Handheld, lightweight, field-proven design withstands
harsh environments and lighting conditions

توضیحات

Combo Analyzer with 4.4GHz Cable Analyzer with 4GHz Spectrum Analyzer,
SignalPROFILER™

Verify RF and fiber-based cell site
performance with a single instrument.
The SignalPROFILER combines the power and functionality
of cable and antenna system analysis, fiber inspection,
spectrum analysis, cellular signal demodulation,
interference analysis, signal coverage mapping and
RF/optical power measurements in a single instrument.
As a multi-functional instrument, the SignalPROFILER can
be configured to meet your specific test needs at the time
of purchase or at a later date as your test needs evolve.
Additional measurement capability can be added on the
fly in the field in a matter of seconds.
Designed specifically for wireless communication
field engineers and technicians who install, maintain
and troubleshoot wireless communication sites, the
SignalPROFILER was developed to get the job done right
– the first time – with multiple cutting edge features that
deliver accurate results, improve productivity and reduce
OPEX and CAPEX.

Standard Measurements & Applications
(Cable & Antenna Analysis)
• Reflection – Return Loss or VSWR
• Fault Location – DFT/RL or DTF/VSWR
• Cable Loss
• ۱-Port Phase
• Smith Chart
• FiberScope Fiber Connector Inspection (DML-OPI)
• Optical Power Meter (DML-OPM)
• Visual Fault Location (DML-VFL)
Standard Measurements & Applications
(Spectrum Analysis)
• Spectrum Analysis
• Channel Power
• Occupied Bandwidth (OBW)
• Adjacent Channel Leakage Ratio (ACLR)
• Field Strength
• AM/FM
Optional Measurement Modes
• High Precision Power Meter (DML-015)
• Interference Analysis (DML-110)
• Coverage Mapping (DML-120)
• Transmission Measurement (DML-025)
• GPS Receiver (DML-999)

Key Measurements
Distance-to-Fault (DTF) identifies the fault location
of impairments within the cell-site transmission cable
system. Fault location impairments and discontinuities
can be detected by either DTF-Return Loss or DTF-VSWR
measurements.
• Identify faults up to 5,000 feet (1,524m)
• High resolution enables up to 2,065 data points for locating
pesky faults
• Includes over 100 different cable types with the ability to
add more
• User definable limit-line automatically indicates pass/fail
condition
• Up to 6 markers can be set for detailed analysis

Interference Analysis:

can detect signal as low as -152 dBm
and supports spectrogram display, RSSI, signal strength and
signal ID capabilities.
• Spectrogram display features a three-dimensional display
of frequency, power and time of spectrum activity
enabling identification of intermittent signal interference,
tracking these signals over time. The dual display screen
allows for easy, simultaneous viewing of both the spectrum
and spectrogram analysis
• Received Signal Strength Indicator (RSSI) observes and
reports the signal strength of a single frequency over time
• Signal strength meter helps to locate interfering signals with
the use of a directional antenna

• Fiber Inspection:

eliminates the most common fiber link
problems by verifying that fiber optic connectors are not
contaminated, letting users quickly inspect and clean fiber
connector connections with a clear pass/fail indication.

• Visual Fault Location:

checks that fiber for continuity and
detects damaged fibers or splices, including fiber breaks,
excessive bends and brakes. Can also trace the path of
fiber through multiple connections and identify the correct
fibers for loss test.
• Cellular Signal Analysis:

provides detailed insight to LTEFDD,
LTE-TDD, WCDMA/HSDPA, TD-SCDMA, CDMA/EV-DO,
GSM/GPRS/EDGE signals and modulation quality.

RF/Optical Power Meter:

measures true RMS power for both
CW and digitally modulated signals with an external power
sensor.
• Users can set minimum and maximum power limits to
automatically indicate pass/fail status

Additional Benefits:

Specifications: Spectrum Analyzer

Frequency
Frequency Range ۹ kHz – ۴٫۴ GHz
Tuning Resolution ۱ Hz
Aging <± ۱٫۰ppm/yr
Frequency Span ۱ kHz to 4 GHz in 1-2-5 sequence (automode), and 0 Hz (zero span)
Bandwidth
Resolution Bandwidth (RBW) ۱۰Hz to 3MHz in 1-3 sequence (auto or manually selectable)
Video Bandwidth (VBW) ۱۰Hz to 3MHz in 1-3 sequence (auto or manually selectable)
Spectral Purity (Phase Noise)
@ ۱ kHz Offset from carrier -۹۰ dBc/Hz
@ ۱۰ kHz Offset from carrier -۱۰۰ dBc/Hz
@ ۱۰۰ kHz Offset from carrier -۱۰۵ dBc/Hz
Amplitude
Dynamic Range > 100 dB
Measurement Range DANL to maximum safe input level
Maximum Safe Input +۳۰dBm (peak power, input attenuation > 15dB), 50VDC
Amplitude Accuracy ≤ ± ۱٫۰ dB
Attenuator Range ۰ dB to 55 dB in 5 dB steps
Displayed Average Noise Level (DANL)
(Input terminated, RBW = 1 Hz, Attn = 0 dBm, Avg Detector)
Preamp Off ≤ -۱۴۴ dBm, typical (1MHz – ۱GHz)
≤ -۱۳۸ dBm, typical (1GHz – ۴GHz)
Preamp On ≤ -۱۵۸ dBm, typical (1MHz – ۱GHz)
≤ -۱۵۴ dBm, typical (1GHz – ۴GHz)
Connectors
RF In Type N, female, 50Ω
RF In Damage +۳۰ dBm, +50 VDC
Connectivity
USB host Type A, 1-Port (connect lash drive for data transfer)
USB client ۵-pin mini-B (connect to PC for data transfer)
LAN ۱۰M/100M LAN Port
Display
Type / Size TFT LCD / 8.4” (۸۰۰ x 600)
Data Storage
Internal ۱ GB, > 2000 saved measurement iles
External Limited by size of USB lash drive
Battery
Type Li-Ion, 11.1V, 5.2AH
Operation > 6.0 hours, continuous; 8.0 hrs, idle (CA mode)
> 4.0 hours, continuous; 8.0 hrs, idle (SA mode)
Environmental
Operating Temperature -۱۰°C to + 55 °C
Storage Temperature -۴۰ °C to + 75 °C
Shock Mil-PRF-28800F Class 2
EMC
European EMC IEC/EN 61326-1:2006
AC Power
AC Adapter Output ۱۵-۱۹ VDC
AC Adapter Input ۱۰۰ – ۲۴۰ VAC, 50-60 Hz
Size & Weight
Size ۲۵۸ mm x 173 mm x 74 mm (10.2 in x 6.8 in x 2.9 in)
Weight ۳ kg (6.6 lbs)
Speciications: RF Power Meter
USB Smart RF Power Sensor
Frequency Range ۱ kHz – ۶ GHz
Measurement Range ۱μW~100mW(-30~+20dBm)
VSWR ۱٫۱
Resolution ۱dB, 0.1dB, 0.01dB, 0.001dB
Dimension ۱۲۴ x 44 x 24
Weight ۲۵۰g
Accuracy Typ.: ±۰٫۲dB
Inline RF Power Meter
Frequency range ۳۰۰MHz to 4000MHz
Measurement Range ۰٫۱۵W to 150W
Insert Loss ۰٫۱dB
VSWR ۱٫۱
Directivity ۳۰dB
Accuracy ±۴%±۰٫۰۵W(+15~+35°C)
±۷%±۰٫۰۵W(-10~+50°C)
Connector Type N(f), 50 Ω

Optional Accessories:

Portable Antennas

۸۰۶-۹۶۰ MHz, N(f), 10 dBi, Yagi ET0806D
۸۲۲-۹۰۰ MHz, N(f), 10 dBi, Yagi ET0850D
۸۲۴-۹۶۰ MHz, N(f), 10 dBi, Yagi ET0824D
۸۸۵-۹۷۰ MHz, N(f), 10 dBi, Yagi ET0900D
۱۷۱۰-۱۸۸۰ MHz, N(f), 10 dBi. Yagi ET1800D
۱۸۵۰-۱۹۹۰ MHz, N(f), 10 dBi, Yagi ET1900D
۱۹۲۰-۲۱۷۰ MHz, N(f), 10 dB, Yagi ET2100D
۲۴۰۰-۲۵۰۰ MHz, N(f), 10 dBi, Yagi ET2400D
۹ kHz to 20 MHz, log periodic (with GPS & compass) ET0020L
۲۰ MHz to 200 MHz, log periodic ET0200L
۲۰۰ MHz to 500 MHz, log periodic ET0500L
۵۰۰ MHz to 3 GHz, log periodic ET3000L
۴۷۰-۸۶۰ MHz, SMA(m), 50 Ω ET0470P
۸۰۶-۸۶۶ MHz, SMA(m), 50 Ω ET0850P
۸۷۰-۹۶۰ MHz, SMA(m), 50 Ω ET0900P
۱۷۱۰ to 1880 MHz, SMA(m), 50 Ω ET1800P
۱۸۵۰ to 1990 MHz, SMA(m), 50 Ω ET1900P
۱۹۲۰ to 2170 MHz, SMA(m), 50 Ω ET2100P
۲۴۰۰ to 2500 MHz, SMA(m) , 50 Ω ET2400
۵۷۲۵ to 5875 MHz, SMA(m), 50 Ω ET5800
Calibration Components
Precision “Y”  Open/Short/Load Calibration Combination, N(m), DC-6GHz, 50Ω E7000-700
Calibration Combo “Y” Open/Short/Load, N(f), DC-6GHz, 50Ω E7000-709
Calibration Combo “T” Open/Short/Load, 7/16 DIN(m), DC-6GHz, 50Ω DCAL-6DM-C
Calibration Combo “T” Open/Short/Load Calibration Combination, 7/16 DIN(f), DC-6GHz, 50Ω DCAL-6DF-C
Precision Adapters
Precision Adapter Kit, 50Ω (PNFNF, PNFD, PNFDF, PNTF) DPAK-1000
Precision Adapter, N(f) to 7/16 DIN N(m), DC to 6GHz, 50Ω DPA-6NFDM
Precision Adapter, N(f) to 7/16 DIN N(f), DC to 6GHz, 50Ω DPA-6NFDF
Precision Adapter, N(f) to SMA(f), DC to 6GHz, 50Ω DPA-6NFSF
Precision Adapter, N(f) to N(m), DC to 18GHz, 50Ω DPA-18NFNM
Precision Adapter, N(m) to N(m), DC to 18GHz, 50Ω DPA-18NMNM
Precision Adapter, N(f) to N(f), DC to 18GHz, 50Ω DPA-18NFNF
Precision Adapter, N(f) to 7/16 DIN(m), DC to 18GHz, 50Ω DPA-18NFDM
Precision Adapter, N(f) to 7/16 DIN(f), DC to 18GHz, 50Ω DPA-18NFDF
Precision Adapter, N(f) to SMA(f), DC to 18GHz, 50Ω DPA-18NFSF
RF Test Port Extension Cables
RF Test Port Cable, Armored, phase stable, 1.5m, N(m) to N(f), 18GHz, 50Ω DTC-18NMNF-1.5
RF Test Port Cable, Armored, phase stable, 1.5m, N(m) to 7/16 DIN(f), 18GHz, 50Ω DTC-18NMDF-1.5
RF Test Port Cable, Armored, phase stable,1.5m, N(m) to 7/16 DIN(m), 18GHz, 50Ω DTC-18NMDM-1.5
RF Test Port Cable, Armored, phase stable,3.0m, N(m) to N(f), 18GHz, 50Ω DTC-18NMNF-3.0
RF Test Port Cable, Armored, phase stable,3.0m, N(m) to 7/16 DIN(f), 18GHz, 50Ω DTC-18NMDF-3.0
RF Test Port Cable, Armored, phase stable,3.0m, N(m) to 7/16 DIN(m), 18GHz, 50Ω DTC-18NMDM-3.0
RF Test Port Extension Cable, phase stable, 1.5m, N(f) to N(f), 18GHz, 50Ω DTC-18NFNF-1.5

Power Sensors

In-line Bi-Directional High Power Sensor, 300 MHz to 4GHz, 2mW to 150W, N(f) 50Ω E7000A-050
Terminal Power Sensor E7000A-040

Attenuators:

۱۰W, 6dB, DC-6GHz, N(f) to N(m) DATT-6NFNM-10-6
۵۰W, 30dB, DC-6GHz, N(f) to N(m) DATT-6NFNM-50-30
۱۰۰W, 40dB, Bi-Directional, DC-18GHz, N(f) to N(m) DATT-6NFNM-100-40

Digital Fiber Microscope

Fiberscope optical iber microscope DI-1000LP

نقد وبررسی

نقد بررسی یافت نشد...

شما برای خرید این محصول باید وارد شده و نقد و بررسی کنید...

Theme Settings